Feature tour · 23 of 26
Direct USB
No ADB, no developer options, nothing to set up on the tablet
Plug the tablet into your computer and it becomes a screen. Nothing has to be switched on first, nothing is installed on the tablet, and nothing has to be put back afterwards. On a Windows PC, installing Decky sets up the computer’s side of the cable.
Support: Connect an Android device by USBNothing to turn on first
No developer options, no USB debugging, no ADB tunnel. Nothing on the tablet has to be changed to make this work, and nothing has to be changed back afterwards.
It finds the tablet, not the dock
Plugged through a USB-C dock, the dock’s own electronics can look like an Android device on the bus. Decky checks before it switches anything, so a dock is never mistaken for the tablet.
The cable always wins
Plug in while the tablet is already running over Wi-Fi and the cable takes over by itself. There is no setting anywhere asking you to choose between them.
No network in it at all
A hotel network that keeps devices from seeing each other, an office your tablet will never be allowed onto, a room with no Wi-Fi in it. A cable does not care about any of that.
Sound and your hands go down it too
The picture goes out and the sound goes with it. Your touches, your pen and the tablet's own keyboard come back the other way on the same wire.
One cable, nothing else
No dongle, no capture device, no second power supply. The cable the tablet already charges with is the cable.